Page 4
Seat(P1) Frame (P2) Frame (P3) Seat (P1) Frame (P2) Frame (P3) Hardware Pack 8 x Bolts 8 x Washers 1 x Allen Key (H1) (H2) (H3)
Page 5
4 x Bolts 4 x Washers (H1) (H2) 1 x Allen Key (H3) Note: To make assembly easier, place the frame over a table. Align holes on seat (P1) with holes on metal frame (P2). Attach seat (P1) to metal frame (P2) using 4 x bolts (H1) and 4 x washers (H2). Apply downward pressure on the metal frame (P2) to secure the bolts (H1) into the pre-drilled holes and hand-tighten by turning the bolts (H1) clockwise.