Table of Contents
Advertisement
Display Inverse
Select Display Inverse, press ENTER button to confirm. Use the DOWN/UP button to select No
(normal display) or Yes (inverse display), press ENTER button to store. Press MENU button back to
the last menu or let the unit idle 30 seconds to exit menu mode.
Language
Select Language, press ENTER button to confirm. Use the DOWN/UP button to select English or
Chinese, press ENTER button to store. Press MENU button back to the last menu or let the unit idle
30 seconds to exit menu mode.
Manual Mode
To select the Manual Mode, press the ENTER button to confirm. Use the DOWN/UP button to select
the Strobe or Dimmer Value. Once selected, press the ENTER button to setup, use the DOWN/UP
button to change the value (0~255). Once selected, press the ENTER button to setup, go back to the
functions without any change, press the MENU button again. Press and hold the MENU button
about one second or wait for 30 seconds to exit the menu mode.
Fixture Information
To select Fixture Information，press the ENTER button to confirm. Use the DOWN/UP button to
select the LED Temp., Fixture Time or Firmware version.
LED Temp.
To select the LED Temp., press the ENTER button to confirm, and the display will show the
temperature of the fixture. To go back to the functions without any changes press the MENU button
again. Hold and press the MENU button for one second or wait for 30 seconds to exit the menu
mode.
Fixture Time
To select the Fixture Time, press the ENTER button to confirm and the display will show the number
of working hours of the unit. To go back to the functions without any changes press the MENU
button again. Hold and press the MENU button for one second or wait for 30 seconds to exit the
menu mode.
13G
Advertisement
Table of Contents
