Table of Contents
Advertisement
Pri./Sec. Mode
To select the Pri./Sec. Mode, press the ENTER button to confirm. Use the DOWN/UP button to
select Primary or Secondary. Once the mode has been selected, press the ENTER button to setup,
to go back to the functions without any changes, press the MENU button again. Hold and press the
MENU button for one second or wait for 30 seconds to exit the menu mode.
No DMX Status
To select the No DMX Status, press the ENTER button to confirm. Use the DOWN/UP button to
select Pri.Sec., Blackout or Last State. Once selected, press the ENTER button to setup, to go back
to the functions without any changes, press the MENU button again. Hold and press the MENU
button for one second or wait for 30 seconds to exit the menu mode.
Display Setting
To select the Display Setting, press the ENTER button to confirm. Use the DOWN/UP button to
select Backlight Intensity, Contrast Ratio, Backlight Auto Off, Display Inverse or Language.
Backlight Intensity
Select Backlight Intensity, press ENTER button to confirm. Use the DOWN/UP button to adjust
backlight intensity from 1 (dark) to 10 (bright), press ENTER button to store. Press MENU button
back to the last menu or let the unit idle 30 seconds to exit menu mode.
Contrast Ratio
Select Contrast Ratio, press ENTER button to confirm. Use the DOWN/UP button to adjust the
contrast ratio from 1 to 30, press ENTER button to store. Press MENU button back to the last menu
or let the unit idle 30 seconds to exit menu mode.
Backlight Auto Off
Select Backlight Auto Off, press ENTER button to confirm. Use the DOWN/UP button to select No
(display always on) or Yes (display goes off 30 seconds after exiting menu mode), press ENTER
button to store. Press MENU button back to the last menu or let the unit idle 30 seconds to exit
menu mode.
12G
Advertisement
Table of Contents
