Fax Server Settings; Remote Fax Machine Settings; Remote Fax Settings; Priority Line Selection - Canon Remote FAX Kit-A1 Service Manual

2
Functions > Basic Function > Remote Fax Machine Settings > Priority Line Selection

Fax Server Settings

Install the fax server to allow for standard fax transmission.
Configure the server settings to enable remote faxing.
Setting/Registration > Function Settings > Send > Fax Settings > Use Remote Fax > On
•
To apply the settings, the unit must be restarted.
2 Functions > Basic Function > Remote Fax Machine Settings > Priority Line Selection

Remote Fax Machine Settings

Remote Fax Settings

■
From the menu, select: [Setting/Registration] > [Function Settings] > [Send] > [Fax Settings]
> [Remote Fax TX Settings], and then configure the [Remote Fax Server Address], [TX
Timeout], [No. of Sending Lines], and [Select Priority Line] settings.
F-2-3 F-2-3
■

Priority Line Selection

•
When performing transmission with a line which does not exist in a FAX server while No. of
Sending Lines or modem dial-in setting of Remote FAX differ from those of the FAX server,
it will be a transmission error (end code#25).
•
When the line information registered in destination does not exist in a FAX server while No.
of Sending Lines or modem dial-in setting of Remote FAX are the same as those of the
FAX server, select a line with the following order: Logical Line> Physical Line> Priority Line.
2-4
F-2-4 F-2-4
2-4