Establishing The Cellular Connection On The Lte Iot 2 Click - Quectel BG96 Developer's Manual

15. Select Create thing.
When you use AWS IoT in your AWS account for the first time, an AWS error may
appear because Device Gateway endpoint provisioning is not complete on your
account. If this occurs, allow AWS services 5-10 minutes to complete, and try again.
The new thing appears on the Things page, for example:
Establishing the cellular connection on the LTE IoT
2 click
Ensure you have connected the terminal antenna. The antenna connects to the MAIN Antenna
connection point on the LTE IoT 2 click.
To power on and establish your cellular connection:
1. Fully insert the micro SIM card into the LTE IoT 2 click.
The socket is a push-to-insert, push-to-release type socket. When the SIM is properly
inserted, it clicks into place and sits flush with the edge of the SIM slot.
2. Combine the LTE IoT 2 click and the Click USB adapter.
21

Establishing the cellular connection on the LTE IoT 2 click

Eseye-enabled Quectel BG96 module Developer Guide v1.8