Quectel BG96 Developer's Manual page 71

Using the Quectel BG96 module configuration file
Section Parameter
iotopmode
nwscanmode
nwscanseq
tech
Eseye-enabled Quectel BG96 module Developer Guide v1.8
Definition
This is a Quectel BG96 module setting. Refer to the
Quectel documentation for more information.
Enables narrow band internet of things (NBIoT)
(default) – iotopmode not enabled
0
– iotopmode is enabled
1
This is a Quectel BG96 module setting. Refer to the
Quectel documentation for more information.
Consult with Eseye before changing this parameter.
Configure which RATs are searched, either:
(default) – automatic
0
– GSM only
1
– LTE only
3
This is a Quectel BG96 module setting. Refer to the
Quectel documentation for more information.
Consult with Eseye before changing this parameter.
Radio Access Technology (RAT) search sequence.
(default) – automatic (LTE Cat M1 to LTE Cat NB1 to GSM)
00
– GSM
01
– LTE Cat M1
02
– LTE Cat NB1
03
For example, will initiate a search in the following order:
010203
GSM to LTE Cat M1 to LTE Cat NB1.
This is a Quectel BG96 module setting. Refer to the
Quectel documentation for more information.
Preferred technology for connecting to the cellular network,
either:
– 2G only
2G
64