Quectel BG96 Developer's Manual page 75

Using the Quectel BG96 module configuration file
Section Parameter
tracelevel
urcautoformat
[udp]
port
url
[sms]
enable
tracelevel
whitelist
[location]
enable
tracelevel
Eseye-enabled Quectel BG96 module Developer Guide v1.8
Definition
MQTT trace level (0-4), for Support purposes. Leave as
For formatting URCs, either:
– sends all URCs as ASCII-hex within quotes
0
For example:
'{"key1":"val1"}'
'+EMQ:<id>,15\r\n"7B226B657931223A2276616C31227D"'
(default) – this option enables sending URCs as either ASCII-hex
1
or text, depending on the received payload.
• If the received payload is printable text (including JSON),
then the URC data is sent as text.
For example:
'{"key1":"val1"}'
'+EMQ:<id>,15\r\n{"key1":"val1"}'
For JSON, the maximum payload is 1012 characters.
Escaped quotes count as 1 character:
• If the received payload is binary data, then the URC data is
sent as ASCII hex.
UDP parameters
UDP IP port. Default: 12401
UDP IP address
SMS parameters
For configuring SMS handling, either:
– SMS handling disabled
0
(default) – SMS handling enabled
1
SMS trace level (0-4), for Support purposes. Leave as
Comma-separated list of one or more MSISDN values from which
SMS is accepted. For example:
Location parameters
For configuring location, either:
(default) – location disabled
0
– location enabled; Quectel BG96 module will always try to
1
establish a GPS/GNSS location while running
Location trace level (0-4), for Support purposes. Leave as
will appear in a URC as
will appear in a URC as
\"
1
447624499970,447624499971
(default).
1
(default).
1
68