Advertisement
Specifications
CA-1E 120V 50/60Hz. Input fuse: 2A. Output: 23,5V. Control Unit model: CA-1E
CA-2E 230V 50/60Hz. Input fuse: 1A. Output: 23,5V. Control Unit model: CA-2E
CA-9E 100V 50/60Hz. Input fuse: 2A. Output: 23,5V. Control Unit model: CA-9E
- Weight:
- Dimensions:
- Output Peak Power:
- Temperature Range:
- Idle Temp. Stability (still air):
- Tip to ground resistance:
- Tip to ground voltage:
- Ambient operating temp:
- Diameter of Solder Wire:
- Solder composition:
- USB connector station-PC
Complies with CE standards
ESD protected housing "skin effect"
Warranty
JBC's 2 year warranty covers this equipment
against all manufacturing defects, including the
replacement of defective parts and labour.
Warranty does not cover product wear or misuse.
In order for the warranty to be valid, equipment
must be returned, postage paid, to the dealer
where it was purchased.
This product should not be thrown in the garbage.
In accordance with the European directive 2002/96/EC, electronic equipment at the end of their life
must be collected and returned to an authorized recycling facility.
Manual in other languages available on our website
www.jbctools.com
www.jbctools.com
2.8 Kg (6.2 lb)
150 x 175 x 145 mm
130W
90 - 450 °C (190 - 840 °F) (±5%)
±1.5 ºC / ±3 ºF
<2 ohms
<2mV RMS
10 - 40 ºC / 50 - 104 ºF
from 0.8 - 1 mm (0.03 - 0.04 in)
from 1.1 - 1.5 mm (0.04 - 0.06 in)
Sn 99% / Ag 0.3% / Cu 0.7%
Advertisement
