This manual corresponds to the following references: CDE-9BQA (100V) CDE-1BQA (120V) CDE-2BQA (230V) Packing List The following items are included: 1 unit General Purpose Handle ...... 1 unit Control Unit .......... Ref. T245-A Power Cord ............ 1 unit Brass Wool..........1 unit Ref.
w w w.jbctools.com Features and Connections Adjustable Stand: Cable Collector Intelligent Heat Management Cartridge Storage Quick Tip Changer Process Screen Tip Cleaner Brass Wool USB-A Connector with Antisplash Membrane and Wiper General Purpose Handle Ref. T245-A Equipotential Connection Pedal Connector USB-B Connector Main Switch Earthing Fuse...
º Tool in the stand C210009 Sel. temp. Actual Temp: 290ºC 325ºC Delay to hiberna�on: 9:43 CDEB Work Screen Power Power C210009 C210009 The CDE offers an intuitive user interface which provides quick access to station parameters. Original PIN: 0105...
Page 5
w w w.jbctools.com Soldering Assistant The Soldering Assistant allows to analyze and compare manual soldering processes in real time, obtaining a qualification of the process. The station compares all new solderings with the reference soldering profile. According to the soldering performed the station gives the user feedback, displaying a color - red or green - along 19:29 19:29 with the percentage of similarity.
Page 6
Min 200 Port Se�ngs Port Se�ngs Counters Counters Reset Reset º Exit Exit Sleep 1. Soldering Assistant Activation Access to station menu by pressing 19:29 19:29 Language Language Ok to reset s Basic Basic Soldering Assistant Soldering Assistant 19:29 Mode Mode 19:29 Language...
Page 7
Time 2.4s 2.3s Port Se�n Max temp 350ºC 350ºC Counters ºC 1s/div ºC 0.5s/div ºC 0.5s/div ºC Min temp 0.5s/div 335ºC 340ºC 0.5s/div C210009 C210-008 Reset Ref. C210009 Ref.. Ref. Ref. C210009 Ref. º ºC º Energy 13W·s 14W·s º +29% Time 2.3s...
Page 8
Cartridge Time Max temp ºC ºC 0.5s/div 0.5s/div Min temp C210009 C210009 Ref. Ref. º ºC º Energy Time 2.3s 1.3s Time 2.2s 2.4s 6. Working With Soldering Assistant Result Sel. temp. 350ºC Energy 14W·s 8W·s Sel. temp. 350ºC Energy 18W·s 17W·s Perform solderings and the station will compare them with the soldering reference.
Operation The JBC Most Efficient Soldering System This revolutionary technology is able to recover tip temperature extremely quickly. This allows the user to work at a lower temperature. As a result, tip life increases by 5. 1. Work 2.
Compatible Cartridges This stations work with C245 cartridges and T245 handles. The CDEB stations work with C245 cartridges and T245 handles. Find the model that best suits your soldering needs in www.jbctools.com Find the model that best suits your soldering needs in www.jbctools.com ø...
Page 11
w w w.jbctools.com Changing the Grips Replace the grips easily using the slip-on tabs. Note: Choose the correct grip depending on your handle D-Q: D-Q: model. Handle ref.: T245-A / T245-C / T245-GA T210-A / T210-NA T245-PA T210-PA Grip ref.: 0016057 (green) 0018658 (green) 0021528 (blue)
If the tip is very dirty, JBC recommends first cleaning it with the wiper to remove excess solder. Wiper Ref. CL0160 A temperature resistant receptacle for removing...
w w w.jbctools.com Removing the Splashguard 1. Unlock the splashguard. 2. Lift off. Lock More cleaning options (not supplied): Inox Wool Metal Brush Ref. CL6205 Ref. CL6220 Stronger cleaning When used carefully, method than brass it provides a more wool. thorough cleaning.
(HMP) requires more power Min. temp. by default is 200ºC or plastics (e. g. riveting). (e.g. multilayered or high (392ºF). This is considered to dissipation boards), JBC be a proper starting point for strongly recommends to leaded applications. use preheaters.
When the user changes adjustment between the (± 90°F) to achieve zero the cartridge type, the selected temperature and the deviation. JBC strongly parameter should be reset current one. recommends the use of TID-A to 0°C/F or to the value or TIA-A Thermometers to needed for this cartridge.
Page 16
Port Settings Parameter Description Recommendations Warnings Temp Level Set The user can set up to 3 diffe- Switch between 3 different rent temperatures. leves by just one “click”. Set them according to the allowed values for your soldering applications. Because our tools reach the Sleep Delay Set the time that the tool working temperature from the...
JBC Web Manager www.jbctools.com/manager.html Manage and monitor as many stations as your PC can handle by using the JBC Web Manager. You can export data to another PC. any JBC station Cable USB AB...
2. Insert the new fuse into the fuse holder and return it to the station. EARTH TOOL When this warning appears on the FUSE main screen Earthing Fuse must be replaced - Repairs should only be performed by a JBC authorized technical service.
Page 19
w w w.jbctools.com Safety It is imperative to follow safety guidelines to prevent electric shock, injury, fire or explosion. - Do not use the units for any purpose other than soldering or rework. Incorrect use may cause fire. - The power cable must be plugged into approved bases. Make sure that it is properly grounded before use.
Page 24
In order for the warranty to be valid, equipment must be returned, postage paid, to the dealer where it was purchased. Get 1 extra year JBC warranty by registering here: https://www.jbctools.com/productregistration/ within 30 days of purchase. This product should not be thrown in the garbage.
Need help?
Do you have a question about the CDEB and is the answer not in the manual?
Questions and answers