Page 1
www.jbctools.com Compact Solder Feed station Ref. CA-E...
Page 2
Packing List The following items should be included: CA Control Unit ......... 1 unit Solder Feed Iron ........1 unit Ref. CA-1E (120V) Ref. AP250-A CA-2E (230V) Supplied with CA-9E (100V) guide tube for Ø 0.8 - 1mm Mobile tube Ø 1.5mm ......1 unit Ref.
Page 3
w w w.jbctools.com Features Cable collector Adjustable Stand: Intelligent Heat Management Control Process Brass wool tip cleaner with antisplash membrane Solder Feed Iron Ref. AP250-A Main switch Fuse Power Socket USB-B connector Equipotential connection...
Page 4
If the tip is very dirty, JBC recommends first cleaning it with the wiper to remove excess solder. Wiper Ref. CL0160 A temperature resistant receptacle for removing excess solder by gently tapping or wiping.
Page 5
w w w.jbctools.com Removing the Splashguard 1. Unlock the splashguard. 2. Lift off. Lock More cleaning options (not supplied): Inox Wool Metal Brush Ref. CL6205 Ref. CL6220 Provides a superior When used carefully, cleaning of the tip. it provides a more thorough cleaning.
Page 6
Changing cartridge The AP250-A Solder Feed Iron works with the C250 Cartridge Range. Find the model that best suits your soldering needs in www.jbctools.com To change a catridge safely, unplug the tool or turn the station off before following these guidelines: 1.
Page 7
Update the station software via USB connection: Cable USB AB Updater JBC Manager www.jbctools.com/manager.html Manage and monitor as many stations as your PC can handle by using the JBC Manager. You can export data to another PC. any JBC station Cable USB AB...
Page 8
Operation The JBC Exclusive Heating System This revolutionary technology is able to recover tip temperature extremely quickly. This allows the user to work at a lower temperature. As a result, tip life increases by 5. 1. Work 2. Sleep 3. Hibernation...
Page 9
w w w.jbctools.com Control Process Work Screen Fixed temp. 3 5 0 Displays a specific fixed temp. Shown when you have selected Levels ºC 2 7 0 3 5 0 4 0 0 temp. levels. The values must be adjusted according to the work needs.
Page 10
(e. g. riveting). more power (e.g. multila- Min. temp. by default is yered or high dissipation 200ºC (392ºF). This is consi- boards), JBC strongly dered to be a proper starting recommends using other point for leaded applications. aids like preheaters.
Page 11
w w w.jbctools.com Tool Settings Parameter description Recommendations Warnings Fix one temperature Ideal for soldering more than Fix a value within the one component at a specific temperature range of the temperature. The station will station (90 - 450ºC / reject any attempt to change 190 - 840ºF).
Page 12
It provides a more precise (± 90°F) to achieve zero error. When the user chan- adjustment between the JBC strongly recommends the ges the cartridge type, the selected temperature and the use of TID-A or TIA-A Ther- parameter should be reset actual one.
Page 13
If necessary use a tool to lever it off. and return it to the station. - Replace any defective or damaged pieces. Use original JBC spare parts only. - Repairs should only be performed by a JBC authorized technical service.
Page 14
Safety It is imperative to follow safety guidelines to prevent electric shock, injury, fire or explosion. - Do not use the units for any purpose other than soldering or rework. Incorrect use may cause fire. - The power cord must be plugged into approved bases. Be sure that it is properly grounded before use.