Unpacking And Inventory - Steel City 20-400 Owner's Manual

wArning
!
This machine is heavy, more
than one person is required to
unpack and lift.
Unpack the machine carefully and make an inventory of the
hardware and accessories in the packaging, referring to the
list below.
Be aware of missing or damaged parts to inform your
supplier as soon as possible.
Front square fixture
2X
Back square fixture
2X
Graduated tape
1X
«d» profile
1X
Square profile
1X
Cast table
1X
Storage box
1X
Blade for hook
1X
Blade insert
1X
Handle nut
2X
unPACKing & inVenTorY
Page 8
degreAsing
In order to prevent any corrosion during transport, an
antirust has been applied. Above all, greasy surfaces
should be wiped clean and cleaned with a clean cloth and
degreaser. Refer to the safety instructions for this type of
product. Do not use solvents such as acetone or lacquer
thinner, painted surfaces will suffer.
Note: any greasy substance can cause adhesion problems
when applying finishing products.
Miter guide
1X
Resaw column
1X
Hexagonal head screw
4X
Hexagonal head screw
2X
Hexagonal bolt
4X
Handle screw
4 X
Washer
4X
Lock washer
4X
Square nut
4X
Hexagonal head screw
4X
Allen key
3X
Brake pedal
1X
Rip guide
1X
THE machine
1X