Unpacking And Inventory - Steel City 20-302 Owner's Manual

wArnInG
!
This machine is heavy, more
than one person is required to
unpack and lift.
Unpack the machine carefully and make an inventory of the
hardware and accessories in the packaging, referring to the
list below.
Be aware of missing or damaged parts to inform your
supplier as soon as possible.
1.
UnPACKInG & InVenTorY
2.
3.
6.
1. Band saw
2. Table
3. Stop paddle
4. Base – end panels
5. Base – side panels
6. Motor
7. Motor step pulley
8. Table support
9. Miter gauge
10. Hardware bags (2)
Page 8
DeGreAsInG
In order to prevent any corrosion during transport, an
antirust has been applied. Above all, greasy surfaces
should be wiped clean and cleaned with a clean cloth and
degreaser. Refer to the safety instructions for this type of
product. Do not use solvents such as acetone or lacquer
thinner, painted surfaces will suffer.
4.
5.
7.
8.
9.
10.