DFI HD101-H81 User Manual page 35

CPU Configuration
This section is used to configure the CPU. It will also display the detected CPU information.
Aptio Setup Utility - Copyright (C) 2012 American Megatrends, Inc.
Advanced
CPU Configuration
Intel(R) Core(TM) i7-4770S CPU @ 3.10GHz
CPU Signature 306c3
Processor Family
6
Microcode Patch
9
FSB Speed
100 MHz
Max CPU Speed 3100 MHz
Min CPU Speed
800 MHz
CPU Speed
3100 MHz
Processor Cores
4
Intel HT Technology Supported
Intel VT-X Technology
Supported
Intel SMX Technology
Supported
64-bit
Supported
EIST Technology Supported
CPU C3 State Supported
CPU C6 State
Supported
CPU C7 State
Supported
L1 Data Cache 32 KB x4
L1 Code Cache
32 KB x4
L2 Cache
256 KB x4
L3 Cache
8192 KB
Hyper-threading [Enabled]
Active Processor Cores
[All]
Intel Virtualization Technology
[Enabled]
EIST [Enabled]
Version 2.15.1236. Copyright (C) 2012 American Megatrends, Inc.
Hyper-threading
Enables this field for Windows XP and Linux which are optimized for Hyper-Threading
technology. Select disabled for other OSes not optimized for Hyper-Threading technol-
ogy. When disabled, only one thread per enabled core is enabled.
Active Processor Cores
Number of cores to enable in each processor package.
Intel Virtualization Technology
When this field is set to Enabled, the VMM can utilize the additional hardware capabili-
ties provided by Vanderpool Technology.
EIST
This field is used to enable or disable the Intel Enhanced SpeedStep Technology.
Chapter 3 BIOS Setup
Chapter 3
SATA Configuration
This section is used to configure the settings of SATA device.
Enabled for Windows XP
and Linux (OS optimized
for Hyper-Threading
Technology) and Disabled
for other OS (OS not
optimized for
Hyper-Threading
Technology). When
Disabled only one thread
per enabled core is
enabled.
Select Screen
→ ←:
Select Item
↑↓:
Enter: Select
+/ -:
Change Opt.
F1: General Help
F2: Previous Values
F3: Optimized Defaults
F4: Save & Reset
ESC: Exit
35
Aptio Setup Utility - Copyright (C) 2012 American Megatrends, Inc.
Advanced
SATA Controller(s) [Enabled]
SATA Mode Selection [IDE]
Serial ATA Port 0 Empty
Software Preserve Unknown
Serial ATA Port 1 Empty
Software Preserve Unknown
Serial ATA Port 4 Empty
Software Preserve Unknown
Version 2.15.1236. Copyright (C) 2012 American Megatrends, Inc.
SATA Controller(s)
This field is used to enable or disable the Serial ATA devices.
SATA Mode Selection
The mode selection determines how the SATA controller(s) operates.
IDE Mode
This option configures the Serial ATA drives as Parallel ATA storage devices.
AHCI Mode
This option allows the Serial ATA devices to use AHCI (Advanced Host Controller Inter-
face).
Enable or disable SATA
Device.
Select Screen
→ ←:
Select Item
↑↓:
Enter: Select
+/ -:
Change Opt.
F1: General Help
F2: Previous Values
F3: Optimized Defaults
F4: Save & Reset
ESC: Exit
www.dfi.com