Where To Go From Here - Symbol AP-51 Series Product Reference Manual

3-12 AP-51xx Access Point Product Reference Guide
Packet Length
4. Click the
Refer to the Number of Responses value to assess the number of responses from the MU
versus the number of ping packets transmitted by the access point. Use the ratio of packets
sent versus the number of packets received the link quality between the MU and the access
point.
Click the OK

3.3.3 Where to Go from Here?

Once basic connectivity has been verified, the access point can be fully configured to meet the needs
of the network and the users it supports. Refer to the following:
• For detailed information on access point device access, SNMP settings, network time,
importing/exporting device configurations and device firmware updates, see
System Configuration on page
• For detailed information on configuring access point LAN interface (subnet) and WAN
interface see,
• For detailed information on configuring specific encryption and authentication security
schemes for individual access point WLANs, see
Security on page
• To view detailed statistics on the access point and its associated MUs, see
Monitoring Statistics on page
Specifies the length of each packet transmitted to the MU during
the test. The default length is 100 bytes.
Ping button to begin transmitting packets to the specified MU address.
button to exit the Echo Test screen and return to the MU Stats Summary screen.
4-1.
Chapter 5, Network Management on page
6-1.
7-1.
5-1.
Chapter 6, Configuring Access Point
Chapter 4,
Chapter 7,