Table of Contents
Advertisement
The export function will always export the encrypted Admin User password. The import
function will import the Admin Password only if the access point is set to factory default. If
the access point is not configured to factory default settings, the Admin User password WILL
NOT get imported.
.
NOTE Though the access point can have its basic settings defined using a
3.3.1 Configuring Device Settings
Configure a set of minimum required device settings within the
defined within the Quick Setup screen are also configurable in numerous other locations within the
menu tree. When you change the settings in the Quick Setup screen, the values also change within
the screen where these parameters also exist. Additionally, if the values are updated in these other
screens, the values initially set within the Quick Setup screen will be updated.
To define a basic access point configuration:
1. Select
System Configuration
screen is not already displayed.
2. Enter a
System Name
The System Name is useful if multiple Symbol devices are being administered.
3. Select the
Country
The access point prompts the user for the correct country code on the first login. A warning
message also displays stating that an incorrect country settings may result in illegal radio
operation. Selecting the correct country is central to legally operating the access point. Each
country has its own regulatory restrictions concerning electromagnetic emissions and the
maximum RF signal strength that can be transmitted. To ensure compliance with national
and local laws, be sure to set the Country accurately. CLI and MIB users cannot configure
their access point until a two character country code (for example, United States - us) is set.
Refer to
Appendix A, Country Codes on page A-7
NOTE The System Name and Country are also configurable within the
number of different screens, Symbol recommends using the access point
Quick Setup
screen to set the correct country of operation and define its
minimum required configuration from one convenient location.
->
Quick Setup
for the access point.
for the access point's country of operation from the drop-down menu
Settings
screen. Refer to
necessary) to set a system location and admin email address for the
access point or to view other default settings.
Quick Setup
from the menu tree, if the Quick Setup
for the two character country codes.
Configuring System Settings on page 4-2
3-5
Getting Started
screen. The values
System
(if
Advertisement
Table of Contents
