Basic Device Configuration - Symbol AP-51 Series Product Reference Manual

• Config file - Readable text file; Importable/Exportable via FTP, TFTP and HTTP. Configuration
settings for an access point can be downloaded from the current configuration of another
access point meeting the import/export requirements. For information on importing or
exporting configuration files, see
• MIB (Management Information Base) accessing the access point SNMP functions using a
MIB Browser. The access point download package contains the following 2 MIB files:
• Symbol-CC-WS2000-MIB-2.0 (standard Symbol MIB file)
• Symbol-AP-5131-MIB (AP-5131 specific MIB file)

3.3 Basic Device Configuration

For the basic setup described in this section, the Java-based Web UI will be used to configure the
access point. Use the access point's LAN interface for establishing a link with the access point.
Configure the access point as a DHCP client. For optimal screen resolution, set your screen resolution
to 1024 x 768 pixels or greater.
1. Start Internet Explorer and enter the following IP address in the address field: 192.168.0.1.
The access point login screen displays.
NOTE DNS names are not supported as a valid IP address for the access point.
NOTE For optimum compatibility, use Sun Microsystems' JRE 1.5 or higher
Importing/Exporting Configurations on page
The user is required to enter a numerical IP address.
(available from Sun's Website), and be sure to disable Microsoft's Java
Virtual Machine if installed.
3-3
Getting Started
4-36.