FlyTek ZIP PRO 2 Operation And Maintenance Manual page 18

ANOMALY
Insufficient or impossible
pouring of the coffee
The coffees poured are cold
even if the lights (ref. C)
are on
The pumps make too much
noise and do not allow the
pouring of the coffee
The "cream" is not enough
or completely lacking
POSSIBLE CAUSE
Lack of network pressure
The water level probe has
moved
Grinding too fine
Cold ceramic cups
Pouring too slow
Faulty heating system
The pumps have sucked-up
air
Grinding too coarse
Coffee not fresh
The water has been in the
tank for many days
SOLUTION
Fill the tank (page 4).
Check that the probe,
inserted in the left hole of
the tank, does not touch the
internal walls of the tank or
other objects.
Use a new pod.
Contact the Supplier
of the pods.
Preheat the cups with hot
water, or place them on the
upper cup-warmer tray.
Alternatively, use disposable
cups.
The water in the tank is
finishing, fill the tank
(page 4).
Contact the Supplier.
Fill the tank (page 4) and
repeatedly press the coffee
pouring switches (ref. D) until
hearing the correct priming of
the pumps.
Use a new pod.
Contact the Supplier
of the pods.
Use a new pod.
Contact the Supplier
of the pods.
Replace the tank water
paying attention to the
correct reinsertion
of the probe.
18