BMW X4 Owner's Manual page 333

3. Insert the connector into the power socket in
the vehicle interior.
4. Correct the tire inflation pressure to at least
2.0 bar:
▷ Increase tire pressure: with standby or
drive readiness turned on, turn on the
compressor and let it run for a maximum
of 10 minutes.
▷ Reduce tire inflation pressure: press the
button on the compressor.
5. Unscrew the connection hose of the com‐
pressor from the tire valve.
6. Pull the connector out of the power socket in
the vehicle interior.
7. Stow the tire repair set in the vehicle.
Continuing the trip
Do not exceed the permissible maximum speed
of 50 mph/80 km/h.
Reinitialize the Flat Tire Monitor.
Reset the Tire Pressure Monitor again.
Replace the faulty tire and the sealant bottle of
the tire repair set promptly.
Additional information:
▷ Run-flat tires, refer to page 341.
▷ Tire pressure monitor, refer to page 334.
Online Edition for Part no. 01405A37CC6 - VI/21
Wheels and tires
Tire chains
Safety information
Warning
With the mounting of tire chains on unsuitable
tires, the tire chains can come into contact with
vehicle parts. There may be a risk of accident
or risk of damage to property. Only mount tire
chains on tires that are designated by their
manufacturer as suitable for the use of tire
chains.
Warning
Insufficiently tight tire chains may damage tires
and vehicle components. There may be a risk
of accident or risk of damage to property. Make
sure that the tire chains are always sufficiently
tight. Re-tighten as needed according to the
tire chain manufacturer's instructions.
Fine-link tire chains
The manufacturer of the vehicle recommends
the use of fine-link tire chains. Certain types of
fine-link tire chains have been tested by the
manufacturer of the vehicle and recommended
as road-safe and suitable.
Information regarding suitable tire chains is avail‐
able from a dealer's service center or another
qualified service center or repair shop.
Hubcap
MOBILITY
333