BMW X4 Owner's Manual page 174

CONTROLS
Cornering light
Principle
In tight curves, for instance on mountainous
roads or when turning, an additional, cornering
light is switched on that lights up the inside of
the curve when the vehicle is moving below a
certain speed.
General information
The cornering light is automatically switched on
depending on the steering angle or, where appli‐
cable, the use of turn signals.
When driving in reverse, the cornering lights may
be automatically switched on regardless of the
steering angle.
Adaptive headlight range
control
The adaptive headlight range control feature bal‐
ances out acceleration and braking processes as
well as the vehicle load conditions in order to
avoid blinding oncoming traffic.
Automatic High Beam
Assistant
Principle
The Automatic High Beam Assistant detects
other road users early on and automatically
switches the high beams on or off depending on
the traffic situation.
General information
The Automatic High Beam Assistant ensures
that the high beams are switched on, whenever
the traffic situation allows. In the low speed
range, the high beams are not switched on by
the system.
174
Lights
Online Edition for Part no. 01405A37CC6 - VI/21
The system responds to light from oncoming
traffic and traffic driving ahead of you, and to am‐
bient lighting, for instance in towns and cities.
The high beams can be switched on and off
manually at any time.
Activate Automatic High Beam
Assistant
Switch position:
Press the button on the turn signal lever.
The indicator light in the instrument clus‐
ter is illuminated when the low beams are
switched on.
The headlights are automatically switched be‐
tween low beams and high beams.
The blue indicator light in the instrument
cluster lights up when the system
switches on the high beams.
The Automatic High Beam Assistant is deacti‐
vated when manually switching the high beams
on and off.
To reactivate the Automatic High Beam Assis‐
tant, press the button on the turn signal lever.