BMW X4 Owner's Manual page 143

Steptronic transmission
Principle
The Steptronic transmission combines the func‐
tions of an automatic transmission with the pos‐
sibility of manual shifting, if needed.
Safety information
Warning
An unsecured vehicle can begin to move and
possibly roll away. There is a risk of accident.
Before exiting, secure the vehicle against roll‐
ing, for instance with the parking brake.
Selector lever positions
Gear position D
Selector lever position for normal driving. All
gears for forward travel are activated automati‐
cally.
R is reverse
Engage selector lever position R only when the
vehicle is stationary.
Neutral N
The vehicle may be pushed or roll without power,
for instance in vehicle washes in selector lever
position N.
Parking position P
General information
Selector lever position, for instance for parking
the vehicle. The transmission blocks the individ‐
ual wheels in selector lever position P.
Engage selector lever position P only when the
vehicle is stationary.
Online Edition for Part no. 01405A37CC6 - VI/21
Driving
P is engaged automatically
Selector lever position P is engaged automati‐
cally in situations such as the following:
▷ After the drive-ready state is switched off and
selector lever position R, D or M/S is en‐
gaged.
▷ After the standby state has been turned off
when selector lever position N is engaged.
▷ If the driver's safety belt is unbuckled, the
driver's door is opened, and the brake pedal
is not pressed while the vehicle is stationary
and selector lever position D, M/S or R is en‐
gaged.
Before exiting the vehicle, make sure that selec‐
tor lever position P is set. Otherwise, the vehicle
may begin to move. Also set parking brake.
Additional information:
Parking brake, refer to page 136.
Engaging selector lever
positions
General information
To prevent the vehicle from creeping after you
select a gear position, maintain pressure on the
brake pedal until you are ready to start.
Functional requirements
Only when the drive-ready state is switched on
and the brake pedal is depressed is it possible to
change from selector lever position P to another
selector lever position.
The selection lever position P cannot be
changed until all technical requirements are met.
Engaging selector lever position D,
N, R
A selector lever lock prevents the following faulty
operation:
CONTROLS
143