BMW X4 Owner's Manual page 290

CONTROLS
Mounting position of the product.
Safety information
Warning
When charging a device that meets the Qi
standard in the wireless charging tray, any
metal objects located between the device and
the tray can become very hot. Placing storage
devices or electronic cards, such as chip cards,
cards with magnetic strips or cards for signal
transmission, between the device and the tray
may impair the card function. There is a risk of
injury and risk of damage to property. When
charging mobile devices, make sure there are
no objects between the device and the tray.
Overview
Tray in the center console:
1 LED
2 Storage area
290
Interior equipment
Online Edition for Part no. 01405A37CC6 - VI/21
Functional requirements
▷ The mobile phone must compatibly support
the required Qi standard.
If the mobile phone does not support the Qi
standard, the mobile phone can be charged
using a special Qi-compatible charging case.
▷ Standby state is switched on.
▷ Observe the maximum dimensions of the
mobile phone.
▷ Use only protective jackets and covers up to
a maximum thickness of 0.07 in/2 mm; other‐
wise, the charging function may be impaired.
▷ The mobile phone to be charged is located in
the center of the tray.
Operation
Inserting the mobile phone
The mobile phone must not exceed the maxi‐
mum size of approximately 6.0 x 3.1 x
0.7 in/154.5 x 80 x 18 mm.
1. Open the tray cover.
2. Place the mobile phone centered in the tray
with the display facing up.
3. Close the tray cover.
Removing the mobile phone
1. Open the tray cover.
2. Remove the mobile phone.