BMW X4 Owner's Manual page 260

CONTROLS
Setting brightness and contrast
Brightness and contrast can be adjusted with
Surround View or Panorama View switched on.
1. Move the Controller to the right, if needed.
2. "Camera image"
3. Select the desired setting.
Functional limitations
The system can be used only to a limited extent
in the following situations:
▷ In poor light.
▷ In case of soiled cameras.
▷ With a door open.
▷ With the tailgate open.
▷ With exterior mirrors folded in.
Gray hatched areas with icon, for instance open
door, in the camera image mark areas that are
currently not displayed.
System limits
System limits of the sensors
Additional information:
▷ Cameras, refer to page 35.
Non-visible areas
Because of the camera angle, the areas under
the vehicle cannot be viewed by the cameras.
Detection of objects
Very low obstacles as well as high, protruding
objects such as ledges may not be detected by
the system.
Some assistance functions also consider data
from the PDC Park Distance Control.
Follow the notes in the PDC Park Distance Con‐
trol chapter.
The objects displayed on the Control Display
may be closer than they appear. Do not estimate
the distance from the objects on the display.
260
Driver assistance systems
Online Edition for Part no. 01405A37CC6 - VI/21
Additional information:
PDC Park Distance Control, refer to page 241.
Malfunction
A camera malfunction is displayed on the Control
Display.
A yellow icon is displayed and the re‐
cording range of the malfunctioning cam‐
era is displayed in black on the Control
Display.
With Parking Assistant
Plus: Panorama View
Principle
Panorama View gives you an earlier view of
crossing traffic at blind driveway exits and inter‐
sections.
General information
Road users concealed by obstacles to the left
and right of the vehicle can only be detected rel‐
atively late from the driver's seat. The cameras in
the front and rear capture the sideways traffic
area to improve the view.
Yellow lines in the screen display mark the front
and rear end of the vehicle.
The camera image shows different levels of dis‐
tortion in some areas and is thus not suitable for
distance estimations.