BMW X4 Owner's Manual page 173

Keep the light source clean and unobstructed.
Pathway lighting
Principle
For the illumination of the vehicle's surroundings
after exiting the vehicle, the exterior lighting can
be switched on for a defined period of time.
Switching pathway lighting on
After switching off the drive-ready state, briefly
push the turn signal lever forward.
Setting the duration
1. "CAR"
2. "Settings"
3. "Exterior lighting"
4. "Pathway lighting"
5. Select the desired setting.
6. "OK"
Daytime driving lights
General information
Switch position:
▷ ,
▷ Depending on the national-market version:
The daytime driving lights light up when drive-
ready state is switched on.
Depending on the national-market version: after
switching off the drive-ready state, the parking
lights will illuminate in position .
Online Edition for Part no. 01405A37CC6 - VI/21
Lights
Activate/deactivate daytime
driving lights
In some countries, daytime driving lights are
mandatory, so it may not be possible to deacti‐
vate the daytime driving lights in front.
1. "CAR"
2. "Settings"
3. "Exterior lighting"
4. Depending on country specifications:
"Daytime driving lights" or "Daytime driving
lights, rear"
Adaptive light functions
Principle
Adaptive light functions enable dynamic illumina‐
tion of the road.
General information
The adaptive light functions may consist of one
system or multiple systems, depending on the
equipment version:
▷ Adaptive Light Control.
▷ Cornering light.
Activating
Switch position:
The adaptive light functions are active when the
drive-ready state is switched on.
Adaptive Light Control
General information
Depending on the steering angle and other pa‐
rameters, the laser high beams follow the course
of the road.
CONTROLS
173