BMW X4 Owner's Manual page 220

CONTROLS
DSC Dynamic Stability Control is switched on, if
necessary.
Turning off
Depending on the equipment version,
press the relevant button on the steer‐
ing wheel.
The displays turn off. The stored set speed is
deleted.
Pausing cruise control
Interrupting manually
When active, press the button.
Interrupting automatically
The system is automatically interrupted in the
following situations, for example:
▷ When braking manually.
▷ Steptronic transmission: gear lever position D
is disengaged.
▷ Dynamic Traction Control DTC is activated or
DSC Dynamic Stability Control is deactivated.
▷ The Dynamic Stability Control (DSC) adjusts.
Setting the speed
Maintaining and storing the speed
Press the rocker switch up or down once while
the system is interrupted.
220
Driver assistance systems
Online Edition for Part no. 01405A37CC6 - VI/21
When the system is switched on, the current
speed is maintained and stored as the set speed.
The stored speed is displayed on the speedom‐
eter.
DSC Dynamic Stability Control is switched on, if
necessary.
The speed can also be stored by pressing a but‐
ton.
Press the button.
Changing the speed
Press the rocker switch up or down repeatedly
until the desired speed is set.
If active, the displayed speed is stored and the
vehicle reaches the stored speed when the road
is clear.
▷ Each time the rocker switch is tapped to the
resistance point, the set speed increases or
decreases by 1 mph/1 km/h.
▷ Each time the rocker switch is pressed past
the resistance point, the desired speed
changes by a maximum of 5 mph/10 km/h.
The maximum speed that can be set de‐
pends on the vehicle.
▷ Pressing the rocker switch to the resistance
point and holding it: vehicle accelerates or
decelerates without pressure on the acceler‐
ator pedal.
After the rocker switch is released, the vehi‐
cle maintains its final speed. Pressing the
switch beyond the resistance point causes
the vehicle to accelerate more rapidly.