BMW X4 Owner's Manual page 261

Depending on the equipment version, the func‐
tion can only be used when driving forward.
Additional information:
Surround View, refer to page 255.
Safety information
Warning
The system cannot serve as a substitute for the
driver's personal judgment in assessing the
traffic situation. Based on the limits of the sys‐
tem, it cannot independently react to all traffic
situations. There is a risk of accident. Adjust
driving style to traffic conditions. Watch traffic
and vehicle surroundings closely and actively
intervene where appropriate.
Overview
Button in the vehicle
Panorama View
Sensors
The system is controlled by the following sen‐
sors:
▷ Front camera.
▷ Depending on the equipment: rearview cam‐
era.
Additional information:
Sensors of the vehicle, refer to page 35.
Driver assistance systems
Online Edition for Part no. 01405A37CC6 - VI/21
Display on the Control Display
Press the button when the engine is run‐
ning.
Depending on the driving direction, the image of
the respective camera is displayed:
▷ "Front": front camera image.
▷ "Rear": rear camera image.
Depending on the vehicle equipment, cross traf‐
fic warning can additionally warn of approaching
vehicles using radar sensors.
Additional information:
Cross traffic warning, refer to page 263.
With navigation system:
activation points
Principle
Positions where Panorama View should switch
on automatically can be stored as activation
points provided that a Global Positioning System
signal is received.
General information
Up to ten activation points can be stored.
Activation points can be used when driving for‐
ward for the front camera.
Storing activation points
1. Drive to the position at which the system is to
be switched on, and stop.
2. Press the button.
3. Tilt the Controller to the right.
4. "Activation point"
The current position is displayed.
5. "Save activation point"
Activation points are, if possible, stored with
town/city and street address, or else with the
Global Positioning System coordinates.
CONTROLS
261