BMW X4 Owner's Manual page 140

CONTROLS
High beams,
headlight flasher
Press the lever forward or pull it backward.
▷ High beams on, arrow 1.
The high beams light up when the low beams
are switched on.
▷ High beams off/headlight flasher, arrow 2.
Window wiper system
General information
Do not use the wipers if the windshield is dry, as
this may damage the wiper blades or cause them
to become worn more quickly.
Safety information
Warning
If the wipers start moving in the folded away
state, body parts can be jammed or damage
may occur to parts of the vehicle. There is a risk
of injury or risk of damage to property. Make
sure that the vehicle is switched off when the
wipers are in the folded away state and the wip‐
ers are folded in when switching on.
140
Driving
Online Edition for Part no. 01405A37CC6 - VI/21
NOTICE
If the wipers are frozen to the windshield, the
wiper blades can be torn off and the wiper mo‐
tor can overheat when switching on. There is a
risk of damage to property, among other poten‐
tial damage. Defrost the windshield prior to
switching the wipers on.
Turn on window wiper system
Press the lever up until the desired position is
reached.
▷ Resting position of the wipers, position 0.
▷ Rain sensor, position 1.
▷ Normal wiper speed, position 2.
▷ Fast wiper speed, position 3.
When the journey is interrupted with the window
wiper system turned on: when the journey con‐
tinues, the wipers resume at their previous
speed.
Turn off the window wiper
system and flick wipe
Press the lever down.