BMW X4 Owner's Manual page 258

CONTROLS
▷ "Parking aid lines".
▷ "Obstacle mark.".
▷ "Settings": apply settings, for instance to
use the activation points for Panorama View.
Rearview camera
This view shows the picture of the rearview cam‐
era.
Selection window
The individual camera perspectives can be se‐
lected in the selection window via iDrive.
Parking aid lines
Lanes
Lanes help you to estimate the space required
when parking and maneuvering on level roads.
Lanes depend on the steering angle and are
continuously adjusted to the steering wheel
movements.
Turning circle lines
Turning circle lines can only be superimposed on
the camera image together with lanes.
258
Driver assistance systems
Online Edition for Part no. 01405A37CC6 - VI/21
Turning circle lines show the course of the small‐
est possible turning radius on a level road.
Only one turning circle line is displayed after the
steering wheel is turned past a certain angle.
Parking using lanes and turning circle lines
1. Position the vehicle so that the red turning
circle line leads to within the limits of the
parking space.
2. Turn the steering wheel to the point where
the green lane covers the corresponding
turning circle line.
Obstacle marking
Obstacles behind the vehicle are detected by the
PDC Park Distance Control sensors.
Obstacle markings can be shown in the camera
image.
The colored thresholds of the obstacle markings
match the markings of the PDC Park Distance
Control.