BMW X4 Owner's Manual page 115

Warning
The protective effect of safety gear, including
safety belts, can be limited or lost when safety
belts are fastened incorrectly. An incorrectly
fastened safety belt can cause additional inju‐
ries, for instance in the event of an accident,
braking or evasive maneuvers. There is a risk of
injury or danger to life. Make sure that all occu‐
pants are wearing safety belts correctly.
Warning
With a rear backrest that is not locked, the pro‐
tective effect of the middle safety belt is not
guaranteed. There is a risk of injury or danger
to life. If you are using the middle safety belt,
lock the wider rear seat backrest.
Warning
The protective effect of safety gear, including
safety belts, may not be fully functional or fail in
the following situations:
▷ The safety belts or safety belt buckles are
damaged, soiled, or changed in any other
way.
▷ Seat belt tensioners or belt retractors
were modified.
Safety belts can be imperceptibly damaged in
the event of an accident. There is a risk of injury
or danger to life. Do not modify safety belts,
safety belt buckles, seat belt tensioners, belt
retractors or belt anchors and keep them clean.
Have the safety belts checked after an accident
at the dealer's service center or another quali‐
fied service center or repair shop.
Seats, mirrors and steering wheel
Online Edition for Part no. 01405A37CC6 - VI/21
Correct use of safety belts
▷ Wear the safety belt twist-free and tight to
your body over your lap and shoulders.
▷ Wear the safety belt deep on your hips over
your lap. The safety belt may not press on
your stomach.
▷ Do not rub the safety belt against sharp
edges, or guide it or jam it in across hard or
fragile objects.
▷ Avoid thick clothing.
▷ Re-tighten the safety belt frequently upward
around your upper body.
Buckling the safety belt
1. Guide the safety belt slowly over shoulder
and hip to put it on.
2. Insert the tongue plate into the safety belt
buckle. The safety belt buckle must engage
audibly.
To ease accessibility to the safety belt buckle, an
adjustable slider is available on the belt to help
position the buckle when not in use.
When the safety belt is fastened, the driver's and
front passenger's belt straps are automatically
tightened once after driving away.
Unbuckling the safety belt
1. Hold the safety belt firmly.
2. Press the red button in the safety belt buckle.
3. Guide the safety belt back into its roll-up
mechanism.
CONTROLS
115