Table of Contents
Advertisement
®
R&S
NRX
13.14.10 Locking
SYSTem:KLOCk <klock>
Disables or enables the front panel keyboard of the instrument including the [LOCAL]
key.
Parameters:
<klock>
SYSTem:LOCK:SHARed:STRing?
Queries the lock string assigned to the locking group if shared locking is enabled.
Writes an error in the error queue if shared locking is not enabled.
Return values:
<result>
Usage:
SYSTem:LOCK:TIMeout <timeout>
Sets the maximum time in milliseconds to wait when processing a command if the
device is locked and the sender of the command is not the owner of the lock before the
command is discarded and an error is written to the error queue.
Setting parameters:
<timeout>
Return values:
<result>
13.15 Using the status register
Further information:
●
Chapter 14.4.2, "Structure of a SCPI status
●
General status register
●
Reading the CONDition
●
Reading the EVENt
●
Controlling the ENABle
●
Controlling the negative transition
●
Controlling the positive transition
13.15.1 General status register commands
STATus:PRESet
STATus:QUEue[:NEXT]?
User Manual 1178.5566.02 ─ 09
OFF | ON
Query only
commands....................................................................... 419
part................................................................................. 420
part........................................................................................421
part.................................................................................. 421
.............................................................................................................420
................................................................................................ 420
Remote control commands
register",
on page 477
part..................................................................422
part................................................................... 423
Using the status register
419
Advertisement
Table of Contents
