Table of Contents
Advertisement
Two periods can be configured for each day. And the time periods can't be overlapped each other.
10.2 Configuring Satellite Positioning
Purpose:
The built-in GNSS module supports GPS (Global Positioning System), contributing to the device positioning and speed
limit alarm.
Steps:
1.
Enter the Satellite Positioning Settings interface.
Menu > Basic Settings > Position
2.
Select the mode of the Positioning Module. Four modes of positioning module are selectable.
RS-232: Obtain data from the satellite positioning module connected through RS-232 interface.
RS-485: Obtain data from the satellite positioning module connected through RS-485 interface.
Built-in: Obtain data from the satellite positioning module built in the mobile DVR.
Display Terminal: Obtain data from display terminal.
3.
Check the checkbox of Satellite Time Adjusting and then select the time zone in which the device locates.
4.
Select the Speed Unit and input the Speed Limit value.
5.
Set the linkage actions for speeding alarm, including Audible Warning and Alarm Output. For details of alarm output
settings, see 11.2.2 Configuring Alarm Output.
User Manual of Mobile Digital Video Recorder
Figure 10. 2 Start Control-Auto Working
Figure 10. 3 Satellite Positioning Settings
49
Advertisement
Table of Contents
