Table of Contents
Advertisement
5 recording types are selectable: Normal, Motion Detection, Alarm, Motion | Alarm and Motion &
Alarm.
Up to 8 time periods can be set for each day and each of the time periods cannot be overlapped.
5.
Click the Set button of More Settings to configure the pre-record and post-record time.
Pre-Record: Normally used for the event (motion or alarm) triggered record, when you want to record before the
event happens. For example, when an alarm occurs at 10:00, if the pre-record time is set as 5 seconds, the camera
records the alarm at 9:59:55.
Post-Record: After the event finished, the video can also be recorded for a certain time. For example, when an
alarm ends at 11:00, if the post-record time is set as 5 seconds, the camera records till 11:00:05.
6.
Optionally, you can select the camera and click Copy to copy the current settings to the selected camera.
7.
Click Apply to save the settings and click OK to exit.
3.2 Configuring Motion Detection Record
Purpose:
In the motion detection record, once a motion event occurs, the device starts to record and multiple linkage actions will be
triggered.
Steps:
1.
Enter the Advanced Camera Settings interface.
Menu > Other Settings > Camera > Set (More Setting)
2.
Check the checkbox of Motion Detection to enable the motion detection function.
User Manual of Mobile Digital Video Recorder
Figure 3. 3 Record Schedule Settings
Figure 3. 4 Motion Detection Settings
33
Advertisement
Table of Contents
