Step 2 Select Exception Type and set corresponding alarm linkage actions, including audible
warning and alarm output.
Step 3 Click OK.
Exception types include:
HDD Full: The HDD is full.
HDD Error: Writing HDD error, unformatted HDD, etc.
Network Disconnected: Network cable is disconnected.
IP Conflicted: Duplicated IP address.
Illegal Login: Incorrect user ID or password.
Video Input/Output Standard Mismatched: Input and output video standards do not
match.
Abnormal Recording: No space for saving recorded files.
12.8 Configure Satellite Positioning
Purpose:
The built-in GNSS module supports GPS (Global Positioning System), enabling device
positioning and speed limit alarm.
Step 1 Go to Menu > Basic Settings > Position.
Step 2 Select Positioning Module.
Built-in: Obtain data from the satellite positioning module built in the device.
Display Terminal: Obtain data from display terminal.
Step 3 Check Satellite Time Adjusting and select your time zone.
Step 4 Select Speed Unit and input Speed Limit.
Step 5 Set the linkage action for speeding alarm, including Audible Warning and Alarm
Output.
Mobile Network Video Recorder User Manual
Figure 12-8 Position
62