HIKVISION DS-MP7504 User Manual
  1. Manuals
  2. Brands
  3. HIKVISION Manuals
  4. DVR
  5. DS-MP7504
  6. User manual

HIKVISION DS-MP7504 User Manual

Hide thumbs
Table of Contents

Advertisement

Quick Links

Mobile Digital Video Recorder
User Manual
UD.6L0204D1113A01

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the DS-MP7504 and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Related Manuals for HIKVISION DS-MP7504

Summary of Contents for HIKVISION DS-MP7504

  • Page 1 Mobile Digital Video Recorder User Manual UD.6L0204D1113A01...
  • Page 2 COPYRIGHT ©2015 Hangzhou Hikvision Digital Technology Co., Ltd. ALL RIGHTS RESERVED. Any and all information, including, among others, wordings, pictures, graphs are the properties of Hangzhou Hikvision Digital Technology Co., Ltd. or its subsidiaries (hereinafter referred to be “Hikvision”). This user manual (hereinafter referred to be “the Manual”) cannot be reproduced, changed, translated, or distributed, partially or wholly, by any means,...

  • Page 3: Regulatory Information

    Mobile Digital Video Recorder User Manual Regulatory Information FCC Information Please take attention that changes or modification not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. Note: This product has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules.
  • Page 4 Mobile Digital Video Recorder User Manual Le pré sent appareil est conforme aux CNR d'Industrie Canada applicables aux appareils radioexempts de licence. L'exploitation est autorisé e aux deux conditions suivantes : (1) l'appareil ne doit pas produire de brouillage, et (2) l'utilisateur de l'appareil doit accepter tout brouillage radioé...

  • Page 5: Safety Instruction

    Mobile Digital Video Recorder User Manual Safety Instruction These instructions are intended to ensure that user can use the product correctly to avoid danger or property loss. The precaution measure is divided into “Warnings” and “Cautions” Warnings: Serious injury or death may occur if any of the warnings are neglected. Cautions: Injury or equipment damage may occur if any of the cautions are neglected.
  • Page 6 Series Models DS-MP7504 DS-MP7504/GW DS-MP7504 Series DS-MP7504/GW/WI This manual may contain several technically incorrect places or printing errors, and the content is subject to change without notice. The updates will be added into the new version of this manual. We will readily improve or update the products or procedures described in the manual.

  • Page 7: Safety Instructions

    20cm if both of them are installed.  The system is made of sophisticated electronics and do not disassemble the device by yourself.  Contact the qualified technician from Hikvision or authorized dealer if there is any question or request.

  • Page 8: Product Key Features

    Mobile Digital Video Recorder User Manual Product Key Features General  User-friendly GUI providing easy and flexible operations.  Each channel supporting up to 4CIF resolution with high-efficient and flexible H.264 encoding technology.  are connectable. HDDs/SSDs  Hard disk box with fan and USB interface supporting intelligent temperature control and data export. ...
  • Page 9 Mobile Digital Video Recorder User Manual Alarm and Exception  Management of alarm input/output.  Management of video loss alarm, motion detection alarm, video tampering alarm.  Configurable arming schedule of alarm input/output.  Alarm for video loss, motion detection, video tampering, video signal exception, video input/output standard mismatch, illegal login, network disconnected, IP confliction, hard disk error, and hard disk full.

  • Page 10: Table Of Contents

    Mobile Digital Video Recorder User Manual TABLE OF CONTENTS Safety Instructions ..............................6 Product Key Features .............................. 7 Chapter 1 Introduction ............................11 Front Panel ..............................11 Rear Panel ..............................11 IR Remote Control Operations ........................12 Starting Up and Shutting Down the Device ....................14 1.4.1 Vehicle Ignition Startup and Time-delay Shutdown .................
  • Page 11 Mobile Digital Video Recorder User Manual Accessing by Push Mode Platform ......................41 Chapter 7 Mobile Specified Functions......................43 Configuring Startup and Shutdown ......................43 Configuring Satellite Positioning ....................... 44 Configuring G-Sensor Alarm ........................45 Configuring Sensor-In ..........................46 Chapter 8 Other Functions ..........................

  • Page 12: Chapter 1 Introduction

    Mobile Digital Video Recorder User Manual Chapter 1 Introduction 1.1 Front Panel The front panel of DS-MP7504 series is displayed below: Figure 1. 1 Front Panel Table 1. 1 Description of Front Panel Index Name Description 10M/100M self-adaptive Ethernet interface.

  • Page 13: Ir Remote Control Operations

    Mobile Digital Video Recorder User Manual Figure 1. 2 Rear Panel Table 1. 2 Description of Rear Panel Index Name Description WIFI WIFI antenna interface. 4-pin aviation plug, audio & video input of channel 1 to 4. CH1 to CH4 AV OUT 4-pin aviation plug for 1-ch audio &...
  • Page 14 Mobile Digital Video Recorder User Manual Figure 1. 3 Remote Control Table 1. 3 Description of the IR Remote Control Buttons Name Description Reserved Power Input device number. 1. Input number, symbol, and character. Number keys 2. Switch to the corresponding channel in Live View mode. 1.

  • Page 15: Starting Up And Shutting Down The Device

    Mobile Digital Video Recorder User Manual Up, Down, Left, Right 1. The DIRECTION buttons are used to navigate between different fields and items in menus. DIRECTION Buttons 2. In the playback interface, they are used for fast forward, slow forward, rewind.

  • Page 16: Vehicle Ignition Startup And Time-Delay Shutdown

    Mobile Digital Video Recorder User Manual the device working mode.  Vehicle ignition startup and time-delay shutdown The mobile DVR starts up when the vehicle ignites and shuts down according to the pre-defined delay time after the vehicle is off. The startup and shutdown of the device depend on the vehicle ignition signal. ...

  • Page 17: Timing On/Off

    Mobile Digital Video Recorder User Manual The normal vehicle power refers to the main power of the vehicle power supply system. After the vehicle is off, the normal vehicle power still provides direct-current source for the other devices inside and generally a main switch is used to turn on/off it.

  • Page 18: Alarm Input / Output Connection

    1.5.1 Alarm Input Connection DS-MP7504 series mobile DVR adopts the high/low-level electrical signals triggering (high level: 6~36 VDC; low level: 0~5 VDC) to realize alarm input. And in order to avoid error report caused by voltage fluctuation, no alarm will be triggered by voltage ranging of 5~ 6VDC.
  • Page 19 Mobile Digital Video Recorder User Manual Put on the antistatic gloves before the installation. Use the screwdriver to loosen and remove the set screw on the 3G and Wi-Fi module. Pull the 3G module out of the mobile DVR. The separate 3G module is shown as the figure. Press the yellow button on the 3G module, to pop up the corresponding SIM card slot.
  • Page 20 Mobile Digital Video Recorder User Manual Place the SIM card into the SIM card slot correctly, as shown in the figure. Place the SIM card slot installed with the SIM card back to the 3G module. Install the 3G module component back to the mobile DVR, and tighten the set screw.
  • Page 21 Mobile Digital Video Recorder User Manual Connect the antenna to the device after the SIM card installation is complete.

  • Page 22: Chapter 2 Basic Operations

    Mobile Digital Video Recorder User Manual Chapter 2 Basic Operations 2.1 Setting Admin Password Purpose: For the first-time access, you need to activate the device by setting an admin password. No operation is allowed before activation. Steps: 1. Input the same password in the text field of New Password and Confirm. Figure 1.

  • Page 23: User Management

    Mobile Digital Video Recorder User Manual Figure 2. 1 Main Page 2.3 User Management The admin user has all the operation permissions of the device. Steps: Enter the User Management interface. Menu>Other Settings>User Figure 2. 2 User Management Click the Add button to enter the Add User interface. Figure 2.

  • Page 24: Display Settings

    Mobile Digital Video Recorder User Manual Input the information of the new user, including user name, password and confirm password. STRONG PASSWORD RECOMMENDED– We highly recommend you create a strong password of your own choosing (using a minimum of 8 characters, including upper case letters, lower case letters, numbers, and special characters) in order to increase the security of your product.
  • Page 25 Mobile Digital Video Recorder User Manual Figure 2. 5 DST Settings Click the Set button of Advance Settings, and you can configure the advanced parameters for display.  Device Name: Input the system name as desired in the text field. ...

  • Page 26: Camera Settings

    Mobile Digital Video Recorder User Manual 2.5 Camera Settings Purpose: You can configure the camera name, OSD (On Screen Display) settings, etc. The settings of OSD, standing for On Screen Display, include the display of camera name, date and week and the corresponding position information.
  • Page 27 Mobile Digital Video Recorder User Manual Perform the following steps to adjust the video parameters, including Brightness, Contrast, Saturation and Hue. Click the Set button of Image Settings to enter the Image Settings interface. Select the parameter item, press Enter key on the remote control, and use the Direction keys to adjust the value of the selected item.

  • Page 28: Preview Settings

    Mobile Digital Video Recorder User Manual 2.6 Preview Settings Purpose: You can configure the dwell time of live view window, set the camera order, enable/disable the audio preview, etc. Steps: Enter the Preview Settings interface. Menu>Other Settings>Preview Figure 2. 10 Preview Settings Select the Video Output from the drop-down list according to the actual needs.
  • Page 29 Mobile Digital Video Recorder User Manual Figure 2. 11 Camera Order Click the Apply button to save the new settings and click OK to exit.

  • Page 30: Chapter 3 Record Settings

    Mobile Digital Video Recorder User Manual Chapter 3 Record Settings 3.1 Configuring Encoding Parameters 3.1.1 Initializing the HDD Before you start: Install at least one HDD card on the mobile DVR for video data storage. Steps: Enter the HDD management interface. Menu >...
  • Page 31 Mobile Digital Video Recorder User Manual Figure 3. 2 Record Settings Select the camera from the drop-down list. Configure the following settings:  Encoding Parameters Main Stream (Normal): used for schedule recording; Main Stream (Event): used for event recording; Sub Stream: used for network transmission. ...

  • Page 32: Configuring Motion Detection Record

    Mobile Digital Video Recorder User Manual  5 recording types are selectable: Normal, Motion Detection, Alarm, Motion | Alarm and Motion & Alarm.  Up to 8 time periods can be set for each day and each of the time periods cannot be overlapped. Figure 3.
  • Page 33 Mobile Digital Video Recorder User Manual Check the checkbox of Motion Detection to enable the motion detection function. Click the Area Settings button to set the area for motion detection. Perform the following steps to set a specified area for motion detection: Press the Edit key on the remote control and a red block appears on the screen.

  • Page 34: Configuring Alarm Triggered Record

    Mobile Digital Video Recorder User Manual 3.3 Configuring Alarm Triggered Record Purpose: Follow the procedure to configure alarm triggered recording. Steps: Enter the Alarm Input settings interface. Menu>Other Settings>AlarmIn Figure 3. 6 Alarm Input Settings Click the Set button of Trig Record Channel to select the alarm triggered recording channel(s). For other alarm input settings, see Chapter 7.2.1.
  • Page 35 Mobile Digital Video Recorder User Manual Figure 3. 7 Video Search Interface Select the camera and video type from the drop-down list, and then specify the start time and end time for search. Click the Play button, and you can play back the searched record files directly. ...

  • Page 36: Chapter 4 Ptz Controls

    Mobile Digital Video Recorder User Manual Chapter 4 PTZ Controls 4.1 Configuring PTZ Settings Purpose: Follow the procedure to set the parameters for PTZ. The configuring of the PTZ parameters should be done before you control the PTZ camera. Before you start: Connect the RS-485 cables of PTZ camera to EXT.DEV interface of the mobile DVR.
  • Page 37 Mobile Digital Video Recorder User Manual Table 4. 1 Description of PTZ Control Panel Icon Description Icon Description Icon Description Direction button and Zoom+, Focus+, Zoom-, Focus-, Iris- the auto-cycle button Iris+ Moving speed Light on/off Wiper on/off 3D-Zoom Image Centralization...

  • Page 38: Chapter 5 Wireless Network Settings

    Wireless Network Settings 5.1 Dialing Settings Before you start: Install a 3G SIM card on the mobile DVR. Dialing function is only supported by DS-MP7504/GW and DS- MP7504/GW/WI series. Steps: Enter the 3G Dialing Settings interface. Menu > Basic Settings > Dial Figure 5.

  • Page 39: Wi-Fi Settings

    5.2 Wi-Fi Settings Purpose: You can connect the device to the Wi-Fi networks and transmit the data via the Wi-Fi. Wi-Fi function is only supported by series. DS-MP7504/GW/WI Steps: Enter the Wi-Fi Settings interface. Menu>Basic Settings>WiFi Figure 5. 3 Wi-Fi Settings Check the checkbox of Enable WiFi to enable the Wi-Fi settings.
  • Page 40 Mobile Digital Video Recorder User Manual 5 configuration files are available and only one SSID can be set for each file. Click the Set button of More Settings, and you can set the IP address and DNS server for Wi-Fi network. Figure 5.
  • Page 41 Mobile Digital Video Recorder User Manual Figure 5. 6 Wi-Fi Status Interface...

  • Page 42: Chapter 6 Platform Settings

    Mobile Digital Video Recorder User Manual Chapter 6 Platform Settings The Mobile DVR can be remotely accessed via 2 platforms: iVMS platform and Push Mode platform. Make sure the parameters configured are valid for the platform you select for login. 6.1 Accessing by iVMS Platform Before you start: Create the device ID of mobile DVR on the iVMS platform.
  • Page 43 Mobile Digital Video Recorder User Manual Figure 6. 2 Push Mode Platform...

  • Page 44: Chapter 7 Mobile Specified Functions

    Mobile Digital Video Recorder User Manual Chapter 7 Mobile Specified Functions 7.1 Configuring Startup and Shutdown Purpose: You can set the shutdown delay time (Vehicle Ignition Startup and Shutdown) or specify the startup/shutdown time (Timing On/Off) for the mobile DVR. ...

  • Page 45: Configuring Satellite Positioning

    Mobile Digital Video Recorder User Manual Two periods can be configured for each day. And the time periods can’t be overlapped each other. Figure 7. 2 Start Control-Auto Working 7.2 Configuring Satellite Positioning Purpose: The built-in GNSS module supports both GPS (Global Positioning System) and BDS (BeiDou Navigation Satellite System, reserved), contributing to the device positioning and speed limit alarm.

  • Page 46: Configuring G-Sensor Alarm

    Mobile Digital Video Recorder User Manual settings, see Chapter 7.2.2. Click the Set button, check the checkboxes of display channels, and click OK to go back to upper menu. Then the device positioning information will be displayed on the selected channels The number of the display channels varies from the device models.

  • Page 47: Configuring Sensor-In

    Mobile Digital Video Recorder User Manual 7.4 Configuring Sensor-In Purpose: Sensor-In detects and records the driving information of the vehicle, including pedal braking, turning left/right, reversing, etc. Steps: Enter the Sensor-In Settings interface. Menu>Basic Settings>Sensor-In Figure 7. 5 Sensor-In Settings Sensor-In is triggered by high or low level and you can set the parameters according to the vehicle.

  • Page 48: Chapter 8 Other Functions

    Mobile Digital Video Recorder User Manual Chapter 8 Other Functions 8.1 Local Network Settings Steps: Enter the Local Network Settings interface. Menu>Basic Settings>Network Figure 8. 1 Local Network Settings Input the device IP address, subnet mask, default gateway, DNS server address and download server IP in the corresponding text fields.

  • Page 49: Alarm Settings

    Mobile Digital Video Recorder User Manual Figure 8. 2 NTP Settings Click Apply to save the new settings and click OK to exit. 8.2 Alarm Settings 8.2.1 Configuring Alarm Input Purpose: Configure the settings for alarm input, including trigger level, arming schedule, alarm linkage actions, etc. Steps: Enter the Alarm Input Settings interface.
  • Page 50 Mobile Digital Video Recorder User Manual  In order to avoid error report caused by voltage fluctuation, no alarm will be triggered by voltage ranging from 5VDC to 6VDC. Click the Set button of Trig Record Channel to select the alarm triggered recording channel(s). The selected channel(s) will start to record when a connected alarm input occurs.

  • Page 51: Configuring Alarm Output

    Mobile Digital Video Recorder User Manual 8.2.2 Configuring Alarm Output Purpose: You can configure the arming schedule, alarm duration time, alarm name for alarm output. Steps: Enter the Alarm Output Settings interface. Menu>Other Settings>AlarmOut Figure 8. 6 Alarm Output Settings Select the alarm output No., input the alarm name as desired in the text field, and then set the alarm duration time.

  • Page 52: Configuring Video Tampering Alarm

    Mobile Digital Video Recorder User Manual 8.2.3 Configuring Video Tampering Alarm Purpose: A tampering alarm is triggered when the camera is covered and the monitoring area cannot be viewed. Linkage actions including audible warning, alarm output, etc., can be set to handle it. Steps: Enter the Advanced Camera Settings interface.

  • Page 53: Configuring Video Loss Alarm

    Mobile Digital Video Recorder User Manual When an alarm is triggered, the local monitor displays the video image from the alarming channel configured for full screen monitoring.  Audio Warning: Trigger an audible beep when an alarm is detected.  Trigger Alarm Output: Trigger an alarm output when an alarm is detected.

  • Page 54: Handling Exceptions

    Mobile Digital Video Recorder User Manual Check the checkbox of Video Loss Detection to enable the video loss detection settings. Click the Handle button of Video Loss Detection, and you can set the arming schedule and alarm linkage actions for video loss alarm.

  • Page 55: Configuring Alarm Terminal

    Mobile Digital Video Recorder User Manual Select the Exception Type and set the alarm linkage actions, including audible warning and alarm output. Click Apply to save the new settings and click OK to exit. 8.2.6 Configuring Alarm Terminal Steps: Enter the Alarm Terminal interface. Menu>Other Settings>Alarm Terminal Figure 8.
  • Page 56 Mobile Digital Video Recorder User Manual Enter the Firewall Settings interface. Menu > Other Settings > Firewall Figure 8. 14 Firewall Settings Optionally, you can select Enable SSH Service, thus to effectively prevent information leakage during remote management. Click the Add button to enter the Add IP Address dialog box, input the trusted IP address, and click OK. Figure 8.

  • Page 57: Serial Port Settings

    Mobile Digital Video Recorder User Manual 8.4 Serial Port Settings Purpose: Two types of serial ports are provided: RS-232 and RS-485. The RS-232 port can be used in two ways:  Console: Connect a PC to the DVR through the PC serial port. DVR parameters can be configured by using software such as HyperTerminal.

  • Page 58: Chapter 9 Device Maintenance

    Mobile Digital Video Recorder User Manual Chapter 9 Device Maintenance 9.1 Checking Status The status of recording, 3G, platform, satellite positioning, G-Sensor, alarm and WiFi can be checked in the Status interface (Menu>Status). Figure 9. 1 Status Interface 9.2 Management and Maintenance 9.2.1 Upgrading the System Purpose: The mobile DVR can be upgraded by local USB device or remote FTP server.
  • Page 59 Mobile Digital Video Recorder User Manual Figure 9. 2 Upgrade Interface Click Refresh to refresh the latest information of the connected USB device. Click Upgrade to start upgrading and reboot the device to activate the new settings.  Upgrading by remote FTP server Before you start: Ensure the network connection of the PC (running FTP server) and the DVR is valid and correct.

  • Page 60: Searching & Exporting Log Files

    Mobile Digital Video Recorder User Manual 9.2.2 Searching & Exporting Log files Purpose: The operation, alarm, exception and information of the device can be stored in log files, which can be viewed and exported at any time. Steps: Enter the Log Search interface. Menu>Maintenance>Log Search Figure 9.

  • Page 61: Restoring Default Settings

    Mobile Digital Video Recorder User Manual Select the log item, and then click Play to play the related record files (If there is any record file related). Connect the USB device to the mobile DVR, and then click Export to export the log file to the USB device for backup. ...

  • Page 62: Viewing System Information

    Mobile Digital Video Recorder User Manual Figure 9. 7 Import/Export Configuration Files Click the Export button to export configuration files to the USB device. To import the configuration file, connect a USB device on which the configuration file is stored to the mobile DVR, and then click the Import button.

  • Page 63: Rebooting Dvr

    Mobile Digital Video Recorder User Manual You can view the status and the free space/capacity of the connected USB or eSATA backup device. And you can also format the backup device if needed. Steps: Enter the Backup Device interface. Menu>Maintenance>Storage Figure 9.

  • Page 64: Chapter 10 Appendix

    Chapter 10 Appendix 10.1 Glossary  3G: 3G refers to the 3rd-generation telecommunication technology which is the high speed transmission of the cell data. The 3G service can transmit sound and other data simultaneously and the bitrate is up to hundreds kbps. ...

  • Page 65: Faq

    Mobile Digital Video Recorder 10.2 FAQ • Why does my DVR make a beeping sound after booting? The possible reasons for the warning beep on the device are as follows: There is no hard disk installed in the device. The hard disk is not initialized. Hard disk error To cancel the beeping sound and use the device without any hard disks, enter the Exception Settings interface.
  • Page 66 Mobile Digital Video Recorder c) The Position Module are configured incorrectly (please see Chapter 6.2). • Why does the device seem unresponsive when operating with the IR remote control? Please read Chapter 1.3, and check: a) The batteries are installed correctly, making sure that the polarities of the batteries are not reversed. b) The batteries are fresh and are not out of power.
  • Page 67 User Manual of Mobile Digital Video Recorder...

This manual is also suitable for:

Ds-mp7504/gwDs-mp7504/gw/wi

Table of Contents