Table of Contents
Advertisement
Chapter 11 Other Functions
11.1 Local Network Settings
Steps:
1.
Enter the Local Network Settings interface.
Menu > Basic Settings > Network
2.
Enter the device IP Address, Subnet Mask, Default Gateway, DNS Server address and Downloading Server IP in
the corresponding text fields.
The IP address of the device should be unique in the network and the default value is 192.168.1.64.
The downloading server IP should be set if you want to upload the videos to the designate server.
3.
Click the Set button of NTP, and you can configure the NTP (Network Time Protocol) settings for the device.
Perform the following steps to configure the NTP settings:
1)
Check the checkbox of NTP to enable the NTP settings.
2)
Enter the Synchronization Interval.
3)
Enter the IP address of NTP server.
4)
Click OK to save the new settings and exit.
User Manual of Mobile Digital Video Recorder
Figure 11. 1 Local Network Settings
52
Advertisement
Table of Contents
