Chapter 6 Mobile Device Features; Timed Shutdown; Delayed Shutdown; Configure Satellite Positioning - HIKVISION AE-MD5043 User Manual

Mobile video recorder

Hide thumbs Also See for AE-MD5043:

Table of Contents

The recorder will automatically start up/shut down according the schedule.

Before You Start

Wire power cord. For details, refer to the Quick Start Guide.

Step 1 Go to Configuration > Vehicle > Startup.

Step 2 Select Auto Work Type as Scheduled Startup/shutdown.

Step 3 Set the shutdown schedule. For detailed steps, refer to Configure Arming Schedule.

Step 4 Optional: Check Low Power Protect and select Low Power Protect Limit. If the voltage of the

recorder reaches the selected threshold, the recorder will shut down automatically.

Step 5 Click Save.

You can set the shutdown delay time (Vehicle Ignition Startup and Shutdown) for the recorder.

Before You Start

Wire power cord. For details, refer to quick start guide.

Step 1 Go to Configuration > Vehicle > Startup.

Step 2 Select Auto Work Type as Halt Delay.

Step 3 Select Delay Time.

Step 4 Click Save.

Step 5 Optional: Check Low Power Protect and select Low Power Protect Limit. If the voltage of the

recorder reaches the selected percentage, the recorder will shut down automatically.

The built-in GNSS module supports GPS (Global Positioning System), enabling device positioning and

speed limit alarm.

Before You Start

Install the positioning antenna.

Step 1 Go to Configuration > Vehicle > Position Settings > Location Configuration.

Step 2 Select Position Module.

Mobile Video Recorder User Manual

Chapter 6 Mobile Device Features

Table of Contents