Placing Folded Documents - Canon DR-S130 User Manual

Placing Folded Documents

Folio Scan enables you to scan documents that are larger than LTR/
A4 and therefore do not fit in the feeder. To use the function, fold the
document in half lengthwise and place it into the feeder. The scanner
will scan both sides and combine the scanned images into a single
image.
1
Sets the scanning conditions.
2
Set the feed selection lever to Bypass mode.
3
Fold the document in half.
Crease the document firmly down its center to fold the
document in half. Fold the document so that its edges are
neatly aligned. If the document is not folded properly, paper
jams may occur or distortions may appear in the combined
scanned image.
IMPORTANT
A portion of the scanned image will be missing at the fold line.
4
Place the document with the folded edge facing right and
the top edge facing downward.
IMPORTANT
Adjust the document guides to fit the width of the document.
Otherwise, the image may scan as skewed or shifted.
Hint
• The side of the folded document facing you will become the right
side of the combined image.
• The maximum size for the combined image is A2. Use this method
to scan A2-sized documents. When scanning a folded document of
a size other than the standard formats, set [Page Size] on the
scanner driver settings screen to [Match original size].
32
(See p. 73)