Removing The Document Feed Tray; About The Canon Imageformula Driver Setting Tool - Canon DR-S130 User Manual

Hint
A counter reset is done from the Canon imageFORMULA Driver
Setting Tool. (See p. 114)

Removing the Document Feed Tray

When you will store or otherwise not use the scanner for a long period
of time, remove the document feed tray.
About the Canon imageFORMULA
Driver Setting Tool
What is Canon imageFORMULA Driver
Setting Tool?
The Canon imageFORMULA Driver Setting Tool can be used to check
the information of the scanner, or to configure the maintenance
settings.
Canon imageFORMULA Driver Setting Tool consists of the following
tabs.
[Information] tab
You can check the firmware's version information and scanner
information.
[Maintenance] tab
You can reset the counter of the roller, or carry out the shrinkage rate
control.
[Control] tab
You can carry out the control settings of hardware and drivers, and
perform the read or write of the control settings.
From the configuration of the hardware, you can set the automatic
power-off function.
[Diagnostic] tab
You can output or delete the log file.
[Network monitor] tab
You can see the scanners on the network. You can also display a Web
menu screen to make various scanner settings.
p. 96)
IMPORTANT
A USB connection is required to make this setting with the Canon
imageFORMULA Driver Setting Tool. When connected via wired LAN
(DR-S150 only) or Wi-Fi, making this setting with the Canon
imageFORMULA Driver Setting Tool is ineffective.
114
"Web Menu" (See