Placing Folded Documents - Canon image Formula DR-C130 User Manual

Placing Folded Documents

Folio Scan enables you to scan documents that are larger than
LTR/A4 and therefore do not fit in the feeder. (The maximum
size is 11" X 17"/A3.)
To use the function, fold the center of the document in half
lengthwise and place it into the feeder. The DR-C130 will scan
both sides and combine the scanned images into a single
image.
● When folding the document, align the right and left sides and
create a sharp, straight fold. Otherwise the document may jam or
the image may not be aligned properly.
● The fold line itself will not be scanned. Keep this in mind if there is
content such as photos, diagrams, or text that spans the fold.
● For Folio scanning, only the Bypass mode can be used. Place
documents one at a time.
● Adjust the document guides to fit the width of the document.
Otherwise, the image may scan as skewed or shifted.
● When scanning folded documents, switch the feed selection lever
to (Bypass)
● When placing folded documents, place the document into the
scanner so that the fold is on the right side. The side of the folded
document facing you will become the right side of the combined
image.
● When scanning a folded document, set [Scanning Side] on the
scanner driver settings screen to [Folio]. ->
Scanning Conditions"
● The maximum size for the combined image is A3.
"Setting Basic