Item
Description
MIB access
Set either [Read/Write] or [Read
restrict
only] as the user rights.
Authentication
Specify MD5 or SHA1 as the
algorithm
authentication method.
Set an authentication password
using 8 to 16 characters. You can
use single-byte letters, numbers,
Authentication
hyphens, and underbars. An error
password
appears when you press the
[Apply] button if you input any
illegal characters.
Encryption
Specify DES or AES as the
algorithm
encryption method.
Set an encrypted password using 8
to 16 characters. You can use
single-byte letters, numbers,
Encryption
hyphens, and underbars. An error
password
appears when you press the
[Apply] button if you input any
illegal characters.
Trap setting
Select ON/OFF for trap setting.
To specify a host to be targeted for
trap setting, input its IP address or
Trap
computer name. You can specify a
destinations
maximum of 5. You can input up to
64 characters in each line.
PIN Setting
If you click [PIN Setting] on the Device Configuration menu, the page
below is displayed.
Default Value
Read only
MD5
None
DES
Item
Enable PIN
None
Current PIN Enter the currently set PIN.
New PIN
New PIN
ON
(Confirmati
on)
COT Admin Connection Setting (DR-S150
None
only)
If you click [COT Admin Connection Setting] on the Device
Configuration menu, the page below is displayed.
104
Description
Enable ([ON]) / disable ([OFF])
PIN.
Enter a new PIN.
Use to confirm the new PIN that
has been entered.
Default Value
OFF
0000
None
None