Replacement Parts; About The Flatbed Scanner Unit - Canon DR-S130 User Manual

External Dimensions
291 mm (11.5")(W) x 247 mm (9.8")(D) x 242 mm
(9.5")(H) (With the document feed tray attached
and the document eject tray closed)
291 mm (11.5")(W) x 600 mm (23.7")(D) x
(14.9")(H) (With the document feed tray attached
and the document eject tray open)
Weight (without AC adapter)
Approximately 3.3 kg (7.44 lb)
Power Supply (using AC adapter)
DC24V 0.9A
Power Consumption
Scanning: Maximum 22.5W or less
In the Sleep mode:
Maximum 3.1W or less (100-120V),
Maximum 3.4W or less (220-240V)
With power switch OFF: Maximum 0.1W or less
Noise Not more than 66 dB
Operating Environment
Temperature: 10°C to 32.5°C (50°F to 90.5°F)
Humidity: 20% to 80% RH
AC Adapter (100 to 240 V type)
Model Number MG1-5039 (24V)
Input AC100 to 240V, 50/60 Hz, 1.06 to 0.6 A
Output DC24V 2.0A
Weight Approximately 0.3kg (0.66 lb)
Specifications are subject to change without notice due to product
improvements.

Replacement parts

Exchange roller kit (product code: 0697C003)
Kit to replace the rollers (feed roller, retard roller).
• For the replacement procedure,
on p. 110.
• Contact your local authorized Canon dealer or service
representative for detailed information about the replacement parts.
378
see "Replacing Consumable Parts"
Option
Carrier sheet (for passports) (Product code: 0697C002)
This is a carrier sheet for scanning passports.
mm
Carrier sheet (product code: 0697C001)
Flatbed scanner unit102 (product code: 2152Cxxx)
Flatbed scanner unit that can be connected to and used with a DR
scanner. Connecting the unit to this scanner enables you to use this
scanner as a flatbed scanner with an automatic document feeder.
Paper Feed Tray with NFC Reader (Product code: 4911C001) (DR-
S150 only)
Paper feed tray with a built-in NFC reader. You can add an NFC
authentication function by connecting the tray to this scanner and
using COT Admin.

About the Flatbed Scanner Unit

The optional Flatbed Scanner Unit can be connected to and used with
this scanner.
System requirements
The computer must comply with the necessary system requirements
of Flatbed Scanner Unit.
The scanner driver of Flatbed Scanner Unit needs to be installed to
use the unit.
About Use with CaptureOnTouch
About Assigning Function to Start Button
When you connect Flatbed Scanner Unit, you can assign Scanning
Shortcut of CaptureOnTouch to the start button of Flatbed Scanner
Unit.
130