Placing Folded Documents - Canon IMAGE FORMULA DR-C125 User Manual

3
Place the card horizontally with the top edge facing
upward.
CAUTION
• Place the card one at a time.
• If you place cards to be fed vertically, they may not be ejected
properly, and cards that get jammed may be damaged when you
remove them. Take care of the orientation when placing cards.
• Ultrasonic double feed detection will not function properly when
scanning cards. Clear the [Detect by Ultrasonic] check box in the
[Feeding] tab.
IMPORTANT
With the straight path, documents are ejected at the front of the
scanner. Do not place anything that will block output near the
document eject area. Also, install the scanner on a smooth surface to
enable documents to be smoothly ejected.

Placing Folded Documents

Folio Scan enables you to scan documents that are larger than LTR/
A4 and therefore do not fit in the feeder. (The maximum size is 11" x
17"/A3.) To use the function, fold the document in half lengthwise and
place it into the feeder. The DR-C125 will scan both sides and
combine the scanned images into a single image.
1
Set the feed selection lever and the eject selection lever.
Set the feed selection lever to the non separation position (upper
position). The feed selection indicator will light orange.
Set the eject selection lever to the straight path position ( ).
31