Installation And Assembly; Lower Instrument Arm Assembly - Ametek Reichert Endurance Tilt Chair and Stand User Manual

Installation And Assembly

WARNING: TO REDUCE THE RISK OF ELECTRICAL SHOCK, DO NOT CONNECT THE UNIT TO A POWER SOURCE
UNTIL THE ASSEMBLY PROCESS IS COMPLETED.
Before
you begin the assembly process:
1. Be sure the floor is level.
2. Be sure your stand is correctly positioned in the desired location.
Lower Instrument Arm
1. Connect the lower instrument arm power cord to the stand.
A
C
B
2. Install the front brake handle.
14
D
F
A. Drag set screw (5/32 allen key)
B. Lower arm power cord
C. The lower instrument arm is pre-installed
on the stand. The arm can be removed
and replaced with one screw located at
the front of the stand.
D. Lock release lever
E
E. Power cord to slit lamp
F. Front brake handle
Endurance Tilt Chair and Stand User's Guide 15250-101 REV-A