Care and maintenance
To lubricate the slides of the gliding rack
1. Remove the rack from the oven. (See
pg. 32.)
2. Fully extend the rack on a large, flat
surface. (Lay newspaper under the
rack for easy cleanup.)
3. Wipe debris from the slide tracks with
a paper towel.
Shake the lubricant bottle before
4.
opening it. Starting with the left (front
and back) slide mechanism, place 4
small drops of lubricant on the 2 bottom
slide tracks close to the bearing carriers.
5. Repeat for the right (front and back)
slide mechanism.
6. Open-close the rack several times to
distribute the lubricant.
7. Replace the cap on the lubricant and
shake it again. Turn the rack over and
repeat Steps 3 – 6.
8. Close the rack, turn it right-side up,
and install it in the oven. (See pg. 32.)
NOTE
Do not spray the gliding rack with cooking
spray or other lubricants.
55
English