Erbe ERBOTOM ICC 200 Instruction Manual page 36

ARGON PLASMA COAGULATION
Applies only to ERBOTOM ICC 200 with Endo Cut and Argon Coag
HF voltage waveform
Crest factor C, at R =500 ohms
L
Rated frequency of the HF voltage
Peak value of the HF voltage
HF rated power
HF power limitation
Setting of the HF power limitation
Display of the HF power limitation
Precision of the power limitation
Activation
HF connecting sockets
BIPOLAR COAGULATION / AUTO BIPOLAR
HF voltage waveform
Crest factor C, at R =500 ohms
L
Rated frequency
Peak value of the HF voltage
Constancy of the HF voltage
Dynamic internal impedance
HF rated power
HF power limitation (P
HFmax.
Setting the HF power limitation
Display of the HF power limitation
Precision of the HF power limitation
Activation of Bipolar coagulation
Auto Start delay
HF connecting sockets
SAFETY FEATURES
Protection class according to EN 60 601-1
Type according to EN 60 601-1
Switching of the neutral electrode
Monitoring of single-surface neutral electrodes
Monitoring of dual-surface neutral electrodes
Max. resistance R between the partial surfaces of the
ü
divided neutral electrodes
Warning signals S dependent on I
w
Monitoring of the HF output parameters
Auto. limitation of the max. HF power
Auto. limitation of the max. activation time
Auto. function control
)
and R
HF ü
5-2
pulse-modulated alternating voltage
C = 8 at 99 W , C=15 at 5 W
max
1 MHz
max. 4 kV p
99 watts at 350 ohms
from 1 watt to 99 watts in 1 watt steps
via up/down keys
7-segment display, 2 decimal places
+/- 1 digit or +/- 15%
via key or via pedal
1
unmodulated sinusoidal alternating voltage
C = 1.4 for all settings
330 kHz
max. 190 V
automatically controlled up to P
0 ohms in rated range
120 watts at 125 ohms
from 1 watt to 120 watts in 1 watt steps
via up/down keys in 1 watt steps
7-segment display, 3 decimal places
+/- 1 digit or +/-15%
via pedal or Auto Start
from 0 to 10 s via program no. 23
1
I
CF
Floating Output
Automatic monitoring of the electric connection
between neutral electrode and high-frequency surgical
unit
Automatic monitoring
a) of the electric connection between the neutral
electrode and high-frequency surgical unit
b) as well as between the neutral electrode and patient
c) of the symmetry of the HF partial currents i
i
HF2
d) of the HF current I
HF
resistance R between the partial surfaces of the
ü
neutral electrode
120 ohms ± 20 ohms
see Diagram S = f ( I
w HF
HF voltage, HF current, HF power
Error display in safety field
adjustable
yes, display in safety field
self-check after switching on the unit
max
HFmax.
HF1
dependent on the contact
, R )
ü
/