Battery Replacement - SHOWTEC Infinity iS-100 Manual

Infinity iS-100

Battery Replacement

(must be carried out by a qualified technician!)
01) Unplug the unit from the electric power source.
02) Remove the 6 screws on the front side of the Infinity.
03) Gently pull the front cover from the device.
04) Disconnect the plug from the PCB.
05) Remove the 2 screws holding the battery pack in place.
06) Replace the old battery pack with a new one.
07) Replace the maintenance cap and fasten all screws.
Fig. 13
Note: WARRANTY on batteries is only 6 months after date of purchase
When your battery remains dead after fully charging or it doesn't function or doesn't charge anymore,
you can order a new battery.
The spare part number for the Infinity Series Battery : SPCI157
Ordercode: 41500
30