Whirlpool ASV09000R Installation Manual page 7

Precautions
Installation
• Installation must be performed by qualified professionals.
Otherwise, it may cause personal injury or damage.
• Must follow the electric safety regulations when installing
the unit.
• According to the local safety regulations, use qualified
power supply circuit and circuit break.
• Do install the circuit break. If not, it may cause malfunction.
• An all-pole disconnection switch having a contact
separation of at least 3mm in all poles should be
connected in fixed wiring.
• Including an circuit break with suitable capacity, please
note the following table. Air switch should be included
magnet buckle and heating buckle function, it can protect
the circuit-short and overload.
• The appliance shall be connected to electric supply with
safety grounding. The appliance must be connected to
an electrical leakage protection switch with sufficient
capacity.
• Do not use unqualified power cord.
• Make sure the power supply matches with the requirement
of air conditioner. Unstable power supply or incorrect
wiring or malfunction. Please install proper power supply
cables before using the air conditioner.
WARNING
4