Whirlpool ASV09000R Installation Manual page 36

Installation of indoor unit
Note:
● Pay attention to dust prevention
and take relevant safety measures
when opening the hole.
Step four: outlet pipe
1. The pipe can be led out in the
direction of right, rear right, left or
rear left.
right
Step five: connect the pipe of indoor unit
1. Aim the pipe joint at the corresponding
bellmouth.
2. Pretightening the union nut with hand.
3. Adjust the torque force by referring to the following sheet. Place the open-end
wrench on the pipe joint and place the torque wrench on the union nut. Tighten
the union nut with torque wrench.
rear left
rear right
Indoor
5-10°
2. When select leading out the pipe
from left or right, please cut off the
corresponding hole on the bottom
case.
left
pipe joint
33
Outdoor
right
cut off
the hole
union nut pipe
55
70