Whirlpool ASV09000R Installation Manual page 38

Installation of indoor unit
2. Make the power connection wire go
through the cable-cross hole at the back
of indoor unit and then pull it out from
the front side.
3. Remove the wire clip; connect the power connection wire to the wiring terminal
with wire clip.
4.Put wiring cover back and then tighten the screw.
5.Close the panel.
Note:
All wires of indoor unit and outdoor unit should be connected by a professional.
for a new one. Avoid extending the wire by yourself.
installation.
The air switch should be all-pole parting and the contact parting distance should
be more than 3mm.
* Please refer to Page 45 of "Connecting the cable", which is regarding the
cable specifications and requirements.
cable-cross
hole
power connection
wire
N(1) 2 3
blue black brown
Outdoor unit connection
air switch must be installed in the line.
35
32
yellow-
green