Cabinet Fastening - H3C S9500 Series Installation Manual

Installation Manual
H3C S9500 Series Routing Switches
Caution:
It is required to remove the top covers before combining cabinets. After combination,
top covers are to be installed again.
B.2.6 Cabinet Fastening
I. Installing anchor plate
Install the anchor plate of the B68-22 cabinet according to Figure B-10. Press the
anchor plate against the cabinet feet. Two anchor plates are required for one cabinet.
Caution:
The anchor plate must be installed in the direction as shown in Figure B-10.
Appendix B Installation of B68 Cabinet
B-9