Installation Flowchart; Mounting The Switch To The Designated Position; Mounting The Switch In A Cabinet - H3C S7500 Series Installation Manual

Installation Manual
H3C S7500 Series Ethernet Switches

4.2 Installation Flowchart

Mount the switch to the
designated position
Install modules of the switch
Connect the grounding cable
Connect the power
Connect the interface cables
Route and bind the cables
Check the installation
Figure 4-1 Installation flowchart

4.3 Mounting the Switch to the Designated Position

4.3.1 Mounting the Switch in a Cabinet

After purchasing an S7500 series switch, you can mount the switch in an H3C N68
cabinet or a standard 19-inch cabinet. The installation methods are similar. The
following example illustrates how to mount a switch onto an N68 cabinet.
Start
cable(s)
End
4-2
Chapter 4 Hardware Installation